BRAM ACOUSTICS · OPUS I KIT
Opus I Kit. Take part in its construction.
€2,990 · Pair · VAT included
Opus I Kit lets you build a pair of loudspeakers yourself using the elements of the original design. You will receive the machined enclosures, Beyma drivers, pre-assembled and tested crossovers, and the parts required for assembly.
With Opus I Kit, the experience begins with construction: discovering each part, understanding its purpose and taking part in bringing the design to life.
As you build your Opus I, you will come to know every layer, every joint and every element that makes up the acoustic system. We designed the enclosure so that you can open it again whenever you need to, reach its components and reassemble it. Building it is also a way of understanding the loudspeaker you will listen to for years.
What you receive
Everything for the pair, organised into four packages.
The Kit is delivered in four boxes, weighing approximately 46 kg in total. Components are grouped and protected according to their function, making them easier to identify during assembly.
BOXES 1 AND 2 · THE ENCLOSURES
One box for each loudspeaker, containing:
- 23 layers of CNC-machined MDF and the corresponding front baffle.
- Four M8 threaded rods per loudspeaker.
- Protective foam trays and shrink-wrapped packaging.
BOX 3 · THE DRIVERS
- Two Beyma 8NMFW 8-inch woofers.
- Two Beyma T25M dome tweeters.
- Drivers protected in their original Beyma packaging.
BOX 4 · CROSSOVERS, FIXINGS AND DOCUMENTATION
- Two fully assembled and tested two-way passive crossovers.
- M8 nuts and washers.
- Inserts and driver mounting screws.
- Connection terminals.
- Two acrylic terminal plates.
- Engraved acrylic top plate.
- Support feet.
- Fixings sorted into bags according to the assembly steps.
- Printed step-by-step assembly manual.
Three-year guarantee on components.
All components supplied by BRAM come with the three-year statutory conformity guarantee applicable to new products sold to consumers in Spain. This includes enclosure parts, drivers, crossovers and fixings.
With the Kit, final assembly is carried out by the buyer. The guarantee covers the conformity of the supplied components, but does not cover damage caused by assembly errors or improper use of tools where BRAM is not responsible.
If incorrect assembly results from deficiencies in the instructions supplied by BRAM, the corresponding statutory liability will apply.
Guided construction, step by step.
The Kit includes a printed assembly manual designed to guide you through building both loudspeakers.
You will find the manual in box 4, alongside the crossovers and fixings organised by assembly stage. You will also receive the Opus I user manual.
Our aim is to help you understand the system from within and take an active part in its construction.